unpack the carton and verify that each one parts listed below are included
1.Head Assembly with column 1set
3.Deal with and Knob 1set
4.Thick and thin brush for clamp each and every 1set
5.M4、M6、M8 Hex key each and every 1pc
Place the base on a level floor,Place the column on the base as deeply as imaginable.and use the hex key M8 to tight the two pieces hex bolts on the side of base.(These are 4 holes on the base on the bench)
Clamp Drill Machine
Put the Electric Drill machine or Die Grinder into the clamp,In line with the size of neck of the machine use different thickness of brush,and use the hex key to tight the clamp lock bolt 8.
Screw the Deal with(20) to the feed shaft 21and tighten it.
And check out to press some times to check the head sliding smooth.if need,add some grease on the sliding slot and adjust the 3pcs screw 14 on the sliding sporter.
Adjustment of height of Head
In line with the workpiece height,Up or down the head assembly,and tight the head lock bolts 9 by hex key.
(unplug the drill before any adjustment of this stand)
Adjust the height of Point clamp 2 to regulate the drill trip.The Max trip for this stand is 60mm.
Adjust the head to bevel drilling and milling.
Loosen the screws 24 between Colum and Head.Turn the Head to desired position,and tighten the screws again.Max.adjustment angle is 90 degree
Trial running machine before operation
trial runs machine no loading before any operation. Warnning:Before operation,please ensure the machine and the stand all assembly securely and no loosen.
warnning: Please keep in mind and comply to all instructions of Drill machine or another machines application on this stand.
0~90 Degree rotable to drill slant hole.
90 Degree rotable to drill slant hole. Copper plug readjustment to confirm the precision and durable. Precise graduation, transparent pointer, spacing function.
Working stroke: 60mm, Down stroke: 6cm
Copper plug readjustment to confirm the precison and durable.Precise graduation:transparent pointer,spacing fuctuion
Frequently Bought Together