Sirrus Nexabond 2500

Sirrus Nexabond 2500

Article Image

Instant Glue Creates Strong Bond

Every now and then you come across a tool that dramatically changes the way you work. Nexabond 2500 is one of those tools. I use a lot of jigs when making furniture, and it’s the perfect glue for securing fences and other parts to them. It also works great for gluing solid-wood edge-banding to sheet goods, even around curves. And because it contains no water, it doesn’t cause materials like MDF to swell. The bond it forms between parts is amazingly strong, but for critical jig parts I’ll continue to reinforce the joint with screws.

Application is very easy. Just a few drops is all you need (don’t spread it over the entire joint like you do with PVA glues). Hold the parts together for a few minutes with clamps, and the joint is done. Edge-banding can be trimmed flush after just 30 minutes. But you don’t need to rush. Nexabond 2500 remains workable until you bring the two parts together and apply pressure. You can apply it to a joint and let it sit. It is available in three different set times: fast (1 to 3 minutes), medium (3 to 5 minutes), and slow (5 to 10 minutes). I use the medium set most frequently.

I also tried Nexabond 2500 for slip-tenon joinery on some small tables. The glue acted as a lubricant, making it easier to get the tenons into the mortises. However, joints must be really tight for the glue to activate. And the squeeze-out became rubbery and difficult to remove. Nexabond 2500 is great for jigs and edging, but I’ll stick with PVA glue for joinery.

Get woodworking tips, expert advice and special offers in your inbox

×

Editor Test Results:

Overall Rating N/A

Manufacturer Specifications:

Manufacturer Sirrus
Manufacturer’s Web Site www.sirruschemistry.com
Manufacturer’s Phone Number 513.448.0308
Weight N/A
Dimensions N/A

(Why?)

Published at Wed, 04 Jun 2014 04:00:00 +0000

{amazon|100|campaign}